8 Amazing Tips and Ideas to Create Wonderful Garden Retaining Walls

A retaining wall is essential when you are looking for leveling the shapes of a slanted section of your garden or having flat spaces for lawns and patios.

Image Courtesy: amico.com.au

In that way, sometimes retaining walls are essential, but they can also be beautiful additions to your garden. Here are some wonderful retaining wall ideas and tips.

1. Check Regulations

Before even planning to have a retaining wall, don’t forget to check the regulations set by your local council and take their approval.

When you are planning to build retaining walls more than a specified height or supporting a car park, driveway or other structures or next to a boundary, council approval is usually a must.

A retaining wall design should contain a drainage system design to prevent the building up of hydrostatic pressure behind the wall.

Poor or no drainage results in failure of most retaining walls because the soil behind the wall becomes saturated and the wall is unable to support it and the weight of the water.

2. Gabion Retaining Walls

Gabion retaining walls are a low cost gravity walls that need no deep footing piles or concrete foundations. The welded wire gabion baskets are also more durable than timber.

To make such a gabion wall attractive, you can install night lighting.

3. Recycled Brick Gabion Walls

Built with the same principle of gabion walls described above, but filled even with recycled bricks, concrete and other durable materials can also be built. This type of wall was exhibited in the Chelsea Flower Show.

4. Reinforced Concrete Masonry Walls

These are built on a reinforced concrete footing. Their strength depends on the steel reinforcing bars as well as concrete infill inside the walls.

An engineer can specify the locations and size of the reinforcing steel in this type of retaining walls and also can specify the drainage system needed behind the wall required to eliminate hydrostatic pressure that can damage the retaining wall.

5. Precast Block Retaining Walls

In precast block retaining walls, concrete blocks are interlocked and assembled together without using mortar.

This type of wall is simple yet labourious and although you can construct these retaining walls Eastern Suburbs from Amico, you can even build them on your own.

These retaining walls can be maximum 1 metre tall and cannot support vehicle loads.

6. In Situ Concrete Retaining Walls

In situ concrete retaining walls are typically designed by engineers and come in a great range of heights and shapes.

Some of them even come as a combination of cantilevered footings, tieback, pile foundations and rock anchors to support the lateral earth pressure.

You should get someone like professional garden maintenance contractor in Sydney from Amico to build this type of wall because the quantity of reinforcing steel and labour required cannot be bought and done by homeowners on their own.

Image Courtesy: amico.com.au

7. River Rock Curved Retaining Walls

The rounded river rocks can be used to create a decorative surface on the curved masonry block retaining walls reinforced with concrete.

This type of wall needs a super-strong foundation to support the weight of the rock cover. But it achieves both structural and aesthetic purposes.

8. Stone Surface Over Concrete

Same as the rounded river rocks, stones can be used to clad masonry block retaining walls reinforced with concrete. You can even install a barbeque, water features and other features and decoration.

This type of wall can make the most of a steep slope of a hill and also create a flat patio space.

Triggering your creativity a little you can find great designs and design elements for your retaining walls that can be both functional as well as decorative.

Use these ideas to create wonderful retaining walls in your garden and they will make your garden look more delightful than ever.

Comments are closed.